Wall Paneling designed, built and installed for Coral Springs — a master-planned city where the same original layouts repeat street after street. Our Fort Lauderdale showroom is about half an hour east.
Panelling in a Broward house does something specific: it gives a big, bright, white room some proportion and some shadow. These rooms are tall and full of light, and a flat wall in that setting reads as unfinished. Fluted or framed panelling puts a rhythm on it. The substrate has to suit the climate — stable, and finished for humidity rather than for a dry interior.
Nearly every neighbourhood has an HOA. Interior work is generally unaffected; anything visible from the street or a shared space is worth confirming first.
Coral Springs is planned to an unusual degree, and the housing repeats — which means the same handful of original kitchen layouts appear across whole neighbourhoods. We have seen most of them, and the good moves are usually the same ones: take out the pass-through, take the cabinetry up, and make the island do real work.
These are family houses in daily use, so the specification leans practical: soft-close everywhere, drawers rather than doors in the base run, and surfaces that survive children rather than photograph well once.
The local detail changes from job to job. This part does not.
Panelling is the quietest thing we make and the one that changes a room most. It gives a wall proportion, hides the joins where a house is not square, and carries doors, storage and lighting inside a single continuous surface — but only if it is set out properly, because a panel grid that misses its openings is worse than a plain wall.
Jib doors, cupboards and services can disappear into the panelling so the wall reads as one surface.
Three different registers for three different rooms — the choice is made against the architecture, not against a trend.
Panel joints are planned to land on door openings, corners and switch positions rather than wherever the module falls.
More on how we approach this → Wall Paneling
We work throughout Coral Springs, including Eagle Trace, Heron Bay, Wyndham Lakes, Turtle Run and Ramblewood. The housing here is an almost entirely master-planned city of 1980s and 1990s family houses, most on their first or second renovation, and the cabinetry is specified for it rather than to a national standard.
Our Fort Lauderdale showroom is about half an hour east. The showroom is at 617 East Sunrise Blvd. Come and see the materials in person, or send the drawings and we will price the job room by room.
Every project is photographed room by room with the materials and the detailing listed, so you can see how a job like this is actually put together before you commit to one.
See the wall paneling we have built
You can also search every finish we specify and every appliance we design around.
One shop draws, finishes and installs all of it, which is why the closet matches the kitchen and there is one number to call when something needs adjusting.
Book a free 30-minute consultation with a designer who works in Coral Springs every week. Send the drawings if you have them — we will itemise the cabinetry by room.
Book Your Consultation