Outdoor Kitchens designed, built and installed for Coral Springs — a master-planned city where the same original layouts repeat street after street. Our Fort Lauderdale showroom is about half an hour east.
Broward is where outdoor cabinetry gets used hardest and treated worst. The season never really ends, the humidity never drops, and east of the Intracoastal there is salt on every surface every day. Converted indoor cabinetry fails here in a couple of seasons, and stainless corrodes at the fixings. Marine-grade aluminium does not — twice as thick as most stainless cabinetry on the market and lighter, with 304 stainless hardware, sealed doors and drawers and integrated drainage so water that gets in has somewhere to go.
Coral Springs is planned to an unusual degree, and the housing repeats — which means the same handful of original kitchen layouts appear across whole neighbourhoods. We have seen most of them, and the good moves are usually the same ones: take out the pass-through, take the cabinetry up, and make the island do real work.
These are family houses in daily use, so the specification leans practical: soft-close everywhere, drawers rather than doors in the base run, and surfaces that survive children rather than photograph well once.
Nearly every neighbourhood has an HOA. Interior work is generally unaffected; anything visible from the street or a shared space is worth confirming first.
The local detail changes from job to job. This part does not.
Outdoor cabinetry is a materials problem before it is a design one. Sun, rain, humidity and — near any coast — salt will destroy an indoor cabinet finished for an indoor life. We build outdoor kitchens in marine-grade aluminium with 304 stainless hardware, sealed doors and drawers, and integrated drainage, because that is what survives.
Door slides, hinges, pulls and levelling legs are all outdoor grade, because the hardware fails long before the box does.
Doors and drawers are sealed with integrated drainage, so water that gets in has somewhere to go.
Twice as thick as most stainless cabinetry on the market and lighter, which also makes it easier to deliver and install.
More on how we approach this → Outdoor Kitchens
We work throughout Coral Springs, including Eagle Trace, Heron Bay, Wyndham Lakes, Turtle Run and Ramblewood. The housing here is an almost entirely master-planned city of 1980s and 1990s family houses, most on their first or second renovation, and the cabinetry is specified for it rather than to a national standard.
Our Fort Lauderdale showroom is about half an hour east. The showroom is at 617 East Sunrise Blvd. Come and see the materials in person, or send the drawings and we will price the job room by room.
Every project is photographed room by room with the materials and the detailing listed, so you can see how a job like this is actually put together before you commit to one.
See the outdoor kitchens we have built
You can also search every finish we specify and every appliance we design around.
One shop draws, finishes and installs all of it, which is why the closet matches the kitchen and there is one number to call when something needs adjusting.
Book a free 30-minute consultation with a designer who works in Coral Springs every week. Send the drawings if you have them — we will itemise the cabinetry by room.
Book Your Consultation